The Most Important Settings / Controls; Main Switch; Frame Rate - Leica X Vario Anleitung

ThE moST ImPorTANT SETTINgS / CoNTroLS

mAIN SWITCh

The Leica X Vario is turned on and off using the main switch (7).
– OFF = Off
– = Single pictures
S
– = Continuous (picture series)
C

Frame rate

Frequencies of 3 fps ( ) or 5 fps (
Low
Select
Continuous Shooting
setting in the submenu
• If the camera is turned on, the monitor image appears.
) are available:
High
in the menu and then the required
Notes:
• Picture series are not possible when using the fl ash. If a fl ash
function is activated, only one picture is taken.
• If the main switch is set to
time, only a single picture is taken.
• The maximum picture frequency of 5 fps is only available with
shutter speeds of / s or faster (
1
60
• After a series with the maximum length of 7 pictures, the frequency
with which they are taken declines slightly. This is due to the time
required to transfer the data from the buff er memory to the card.
• Regardless of how many pictures are taken in a series, the last
picture is always shown when they are reviewed. You can select
the other pictures in the series by pressing right or left on the
direction pad (25).
116
and the self timer is used at the same
C
/ s at 3 fps).
1
4