Preparation For Operation; Assembly Of The Device - hillvert HT-LOGAN-1250B Bedienungsanleitung

3.2.
LOCATION OF THE DEVICE
The ambient temperature must not exceed 45°C and ambient humidity should not
exceed 85%. Use the device in properly ventilated spaces. Do not block the air outlet
of the device. Keep the device away from any hot surfaces.

ASSEMBLY OF THE DEVICE

Maintenance or assembly works with the running engine are prohibited.
1. Connect the flexible corrugated tube (a) to the blower's air outlet. Next,
connect the tube (c) to the other end of the tube (a) by rotating it
counterclockwise until you feel resistance. Secure the connections with metal
clamps.
7. Setting lever
8. Sliding ignition switch
9. Backpack straps
10. Spark plug
11. Starter cord holder
12. Fuel line
13. Suction lever

Preparation for operation