Inhaltsverzeichnis
Werbung
2
1
FUSE INSPECTION
6. Install:
Battery
G
7. Check:
Battery terminals
G
Dirt → Clean with a wire brush.
Loose connection → Connect properly.
8. Lubricate:
Battery terminal
G
Recommended lubricant
Lithium soap base grease
9. Connect:
Battery lead coupler
G
(to the battery terminals)
10. Install:
Rear fender
G
Seat
G
FUSE INSPECTION
CAUTION:
To avoid a short circuit, always set the
main switch to "OFF" when checking or
replacing a fuse.
1. Remove:
Seat
G
Rear fender
G
2. Check:
Continuity
G
Checking steps:
Remove the fuse 1.
G
Connect the pocket tester to the fuse and
G
check the continuity.
NOTE:
Set the pocket tester selector to "Ω × 1".
Pocket tester
YU-03112-C/90890-03112
If the pocket tester indicates "∞", replace
G
the fuse.
2 Reserve fuse
3 - 25
INSP
ADJ
Werbung
Inhaltsverzeichnis
