SPORTSTECH F31s Benutzerhandbuch Seite 29

4.3 FIXING AND CONNECTING THE CONSOLE
B
E
B
D
2L
• Have a second person assist you with these steps.
Connecting the cables
• One person holds the console above the console stands, as shown in the figure.
The second personconnects the cable (CC) from the console to the cable from the base frame (CM).
•
• Carefully insert the console's fixing brackets into the openings of the console stands.
- Make sure not to pinch your fingers!
- Make sure not to pinch the cable!
Fixing the console on the console stands
• Fasten the console in the console stands from the side:
Insert a short bolt (B) and a normal washer (D) in the boreholes on the left and right side, as shown in
the figure above. Fasten them with the HEX wrench.
Fasten the console in the console stands from the rear:
•
Insert a short bolt (B) and a spring washer (E) in the boreholes on the left and right side, as shown in
the figure above. Fasten them with the HEX wrench.
4.4 FINALIZING THE ASSEMBLING
Check the firmness of all screw connections again.
•
B
B
E
D
2R
4 x
CC
2 x
CM
2 x
Hex 6 mm
DE
EN
B
D
E
29