Special Safety Instructions For Sheet Metal Working Machines; Hazard Warnings; Residual Risks - HOLZMANN-MASCHINEN AKM1020P Betriebsanleitung

 Ensure sufficient space around the machine!
 Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects!
 Ensure a clean working environment.
 Only use perfect tools that are free of cracks and other defects (e.g. deformations).
 Remove setting tools from the machine before switching on.
 Keep the area around the machine free of obstacles (e.g. dust, chips, cut workpiece parts
etc.).
 Check the strength of the machine connections before each use.
 Never leave the running machine unattended.
 The machine may only be operated, serviced or repaired by persons who are familiar with
it and who have been informed of the dangers arising in the course of this work.
 Ensure that unauthorised persons maintain a safe distance from the machine and, in
particular, keep children away from the machine.
 When working on the machine, never wear loose jewellery, loose or protruding clothing or
accessories (e.g. tie or scarf).
 Wear suitable protective equipment (eye protection, safety shoes) as well as close-fitting
work protective clothing.
 Hide long hair under hair protection.
 Always work with care and the necessary caution and never use excessive force.
 Do not overload the machine!
 Do not work on the machine if you are tired, not concentrated or under the influence of
medication, alcohol or drugs!

12.4 Special safety instructions for sheet metal working machines

 Do not move the workpiece when loaded.
 Do not compress springs or other elastic objects. These could come loose dangerously.
 Do not operate the machine beyond its rated capacity.
 Keep hands and feet away from the clamping devices during work.
 Sharp sheet edges can easily cut fingers, hands or other body parts. Always wear leather
gloves when handling sheet metal and always deburr the edges.

12.5 Hazard warnings

Despite their intended use, certain residual risks remain:

Residual risks

 Risk of injury to hands/fingers by squeezing between moving and fixed parts (down
holder, back gauge, workpiece supports ...).
 Risk of injury to hands/fingers by cutting edges of the workpiece.
 Risk of injury due to the workpiece falling down on the back of the machine.
Due to the structure and construction of the machine, hazardous situations may occur when
handling the machines, which are identified in this manual as follows.
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
HOLZMANN MASCHINEN GmbH
D A N G E R
W A R N I N G
C A U T I O N
www.holzmann-maschinen.at
SAFETY
AKM1020P | AKM1520 | AKM2020
20