Possible Cause - HOLZMANN-MASCHINEN AKM1020P Betriebsanleitung

17 TROUBLESHOOTING
If you find yourself unable to carry out necessary repairs properly and/or do not have the
required training to do so, please consult an expert to solve the problem.
Problem
Machine does not work
Machine does not bevel the
workpiece correctly
Machine does not bevel the
materials specified in the
manual
HOLZMANN MASCHINEN GmbH

Possible cause

 Mechanic defect
 Wrong sheet thickness
 Wrong material has been
inserted
 Bevelling segments
inaccurately adjusted
 Bevelling angle incorrectly
set
 Clamping pressure too low
 Incorrect sheet thickness
Mechanic defect

www.holzmann-maschinen.at
TROUBLESHOOTING
Solution
 Check mechanics
 Repair by a qualified
technician
 Observe the max. sheet
thickness
 Only process suitable
material
 Align bevelling segments
parallel, replace ic
necessary
 Check bevelling angle and
readjust if necessary
 Check clamping pressure
and readjust if necessary
 Check the material to be
bent
 Repair by a qualified
technician
AKM1020P | AKM1520 | AKM2020
28