Ambu aBox 2 Bedienungsanleitung Seite 35

To stop the stopwatch counter, press the Stopwatch
•
the stopwatch stops and the icon turns white 24 .
To start the stopwatch counter again, press the Stopwatch
•
counter will start from where it was paused.
If the visualization device is unplugged before the stopwatch is stopped, the counter will stop
and the procedure folder, the timestamps table, and duration of the procedure will pop up, as
if the procedure has ended 25 . The timestamps and duration of the procedure is saved on the
displaying unit and can be viewed in the procedure folder in Archive
If the same visualization device is reconnected within 60 seconds, the displaying unit will
return to live view mode and the counter will continue from the time the device was
disconnected.
If the same visualization device is reconnected after 60 seconds, the user must press Continue
procedure 26 to return to the live view image, continue the procedure and continue the
counter from the time the device was disconnected.
When the procedure has ended, the timestamp table will be displayed in a pop-up window
and saved to the procedure folder.
23
24
button again. The counter on
00:00
button again. The
00:00
(see section 7.4.).
35