Balluff BIS C-60 2 Serie Handbuch Seite 69

C60_2-028_823024_0401-e.p65
61
Electrical
Connections
(continued)
with KL2 only:
Function Displays
62
62 E
BIS C-6002
Technical Data
Digital Input (+IN, –IN)
Control voltage active
Control voltage inactive
Input current at 24 V
Delay time, typ.
Control outputs CT Present 1 and 2
Output circuit PNP (current sourcing)
Operating voltage V (external) for output
SO
Ripple
Output current
Voltage drop at 20 mA
Output resistance R
A
Service interface
Read/Write Head
option for mounted adapter BIS C-650 *)
option for mounted adapter BIS C-670 *)
*) rotatable by 90 degrees
BIS operating messages:
Ready / Bus active
CT1 Present / operating
CT2 Present / operating
BIS C-6002
Technical Data
The CE-Mark is your assurance that our products are in conformance with the
EC-Guideline
89/336/EEC (EMC-Guideline)
and the EMC Law. Testing in our EMC Laboratory, which is accredited by the DATech for
Testing of Electromagnetic Compatibility, has confirmed that Balluff products meet the
EMC requirements of the Generic Standard
EN 61000-6-4 (Emission) and EN 61000-6-2 (Noise Immunity).
Terminal block, Optocoupler isolated
4 V to 40 V
1.5 V to –40 V
11 mA
5 ms
Optocoupler isolated
DC 24 V ± 20 %
≤ 10 %
max. 20 mA
approx. 2.5 V
10 kΩ to –V
SO
RS 232
integrated, BIS C-65_ and following *);
2 x connectors 4-pin (male)
for all read/write heads BIS C-3_ _
with 4-pin connector (female),
except BIS C-350 and BIS C-352
1 x connector 8-pin (male)
for one of the read/write heads
BIS C-350 or BIS C-352
LED red / green
LED green / yellow
LED green / yellow
E 61