ResMed ClimateLineAir 11 Bedienungsanleitung Seite 6

Note: The manufacturer reserves the right to change these specifications
without notice.
Resistance to flow
The table illustrates the resistance to flow of the air tubing:
Air tubing
ClimateLineAir 11
Compliance
The table illustrates the compliance of the air tubing:
Air tubing
ClimateLineAir 11
Symbols
Temperature limitation.
Operating altitude.
Manufacturer.
number.
European Authorized Representative.
Importer.
See symbols glossary at ResMed.com/symbols.
Environmental information
This device should be disposed of separately, not as unsorted
municipal waste. To dispose of your device, you should use
appropriate collection, reuse and recycling systems available in
your region. The use of these collection, reuse and recycling
systems is designed to reduce pressure on natural resources and
prevent hazardous substances from damaging the environment.
If you need information on these disposal systems, please contact
your local waste administration. The crossed-bin symbol invites
you to use these disposal systems. If you require information on
collection and disposal of your ResMed device please contact
your ResMed office, local distributor or go to
ResMed.com/environment.
Limited warranty
Refer to your device user guide.
At flow (l/min)
with pressure
of 20 cm H
(20 hPa)
30
15
Compliance (ml/cm H
pressure of 60 cm H
Air tubing only
0.500
Catalog number.
Serial number.
Medical device.
Resistance to flow
(cm H
O (hPa/l/min)
2
Air tubing only
0.0100
0.0077
Humidity limitation.
Atmospheric pressure limitation.
Batch code.
O/l/min)
2
O [ml/hPa]) with
2
O (60 hPa)
2
Device
English 5