FIRST USE AND DAILY OPERATION
FIRST USE
Before using it, we recommend that you clean your appliance
*
with a slightly damp cloth and make sure that all the parts are
completely dry. To carry out this operation, make sure that the
appliance is properly disconnected.
START-UP AND OPERATION
Remove the transparent bowl and fill the water tank up to the
*
maximum level (NB: Do not exceed this level in order to avoid
any overflow)
Place the bowl back on top of the tank and make sure that it is
*
securely fastened in-between its
Lift off the cover, put in the number of sausages that you want
*
(
1
to
8
), and close the cover.
Cut the bread (to a maximum length equalling that of the rods)
*
and place it on the stainless steel rods.
Power up the appliance (switch position (I)).
*
Wait
2
to
3
minutes for the water to boil.
*
Once the water has evaporated, your sausages will be cooked.
*
You can keep them warm inside the bowl or eat them as soon
*
as you want to.
Once all the sausages have been taken out of the bowl, switch off
*
the appliance and disconnect it.
If you want to cook more sausages, switch off the appliance and
*
repeat the operation.
clips.
4
MAINTENANCE
Warning: make sure that your appliance is
*
properly disconnected and has completely
cooled down before cleaning it.
Never immerse the base of your appliance in
*
water.
Important: never place the appliance in a
*
dishwasher.
Clean the tank using a sponge slightly soaked
*
in detergent, and rinse only with a sponge or
using a cloth.
As the water tank has a non-stick coating,
*
never use abrasive pads or metal accessories
because they will damage the appliance.
The bowl and the cover may be placed in a
*
dishwasher.
The body of your appliance can be cleaned
*
using a damp cloth. Add a bit of detergent
if necessary.
32