Order Data; Order Codes - Gemü 550 Betriebsanleitung

6 Order data

6 Order data
The order data provide an overview of standard configurations.
Please check the availability before ordering. Other configurations available on request.

Order codes

1 Type
Angle seat globe valve, pneumatically operated,
stainless steel piston actuator
2 DN
DN 6
DN 8
DN 10
DN 15
DN 20
DN 25
DN 32
DN 40
DN 50
DN 65
DN 80
3 Body configuration
2/2-way body
Angle valve body
4 Connection type
Spigot
Spigot DIN
Spigot EN 10357 series B,
formerly DIN 11850 series 1
Spigot EN 10357 series A (formerly DIN 11850 series
2)/DIN 11866 series A
Spigot SMS 3008
Spigot ASME BPE
Spigot ISO 1127/EN 10357 series C/DIN 11866 series B
Spigot ANSI/ASME B36.19M schedule 10s
Spigot ANSI/ASME B36.19M schedule 40s
Threaded connection
Threaded socket DIN ISO 228
Threaded socket Rc ISO 7-1,
EN 10226-1, JIS B 0203, BS 21,
end-to-end dimension ETE DIN 3202-4 series M8
Threaded socket NPT,
end-to-end dimension ETE DIN 3202-4 series M8
Threaded spigot DIN ISO 228
Flange
Flange EN 1092, PN 25, form B,
face-to-face dimension FTF EN 558 series 1, ISO 5752,
basic series 1
Flange EN 1092, PN 25, form B
Flange ANSI Class 150 RF
Clamp
Clamp ASME BPE,
face-to-face dimension FTF ASME BPE
GEMÜ 550
Code 4 Connection type
550 Clamp DIN 32676 series B,
face-to-face dimension FTF EN 558 series 1
Clamp DIN 32676 series A,
Code
face-to-face dimension FTF EN 558 series 1
6
Clamp ASME BPE,
8
face-to-face dimension FTF EN 558 series 1
10
5 Valve body material
15
1.4435, investment casting
20
1.4408, investment casting
25
1.4435 (F316L), forged body
32
1.4435, investment casting
40
Note: A surface finish from the order code table "K
50
number" must be specified for valve body material C2.
65
6 Seat seal
80
PTFE
Code
PTFE, glass fibre reinforced
D
PTFE
E
FDA-compliant, USP class VI
Code
7 Control function
Normally closed (NC)
0
Normally open (NO)
16
Double acting (DA)
8 Actuator version
17
Actuator size 0G1
37
Actuator size 0M1
59
Actuator size 1G1
60
Actuator size 1M1
63
Actuator size 2G1
65
Actuator size 2M1
Actuator size 3G1
1
Actuator size 3M1
3C
Actuator size 4G1
Actuator size 5G1
9 Type of design
3D
Without
9
For higher operating temperatures
Special vent system integrated in actuator
10
Ra ≤ 0.6 μm (25 μinch) for media wetted surfaces,
in accordance with ASME BPE SF2 + SF3
mechanically polished internal
13
Ra ≤ 0.8 µm (30 µinch) for media wetted surfaces,
47 in accordance with DIN 11866 H3,
mechanically polished internal
Ra ≤ 0.4 μm (15 μinch) for media wetted surfaces,
80
in accordance with DIN 11866 H4, ASME BPE SF1
mechanically polished internal
52 / 92
Code
82
86
88
Code
34
37
40
C2
Code
5
5G
5P
Code
1
2
3
Code
0G1
0M1
1G1
1M1
2G1
2M1
3G1
3M1
4G1
5G1
Code
2023
6996
1903
1904
1909
www.gemu-group.com