General Power Tool Safety Warnings - Makita GA042G Betriebsanleitung

Work mode: disc sanding w ith normal side grip
Model
G A 04 2G
G A 04 3 G
G A 04 4 G
G A 04 5G
G A 04 6G
G A 04 7 G
Work mode: disc sanding w ith anti vibration side grip
Model
G A 04 2G
G A 04 3 G
G A 04 4 G
G A 04 5G
G A 04 6G
G A 04 7 G
NOTE: T h e d e c l a r e d v i b r a t i o n t o t a l v a l u e ( s ) h a s b e e n m e a s u r e d i n a c c o r d a n c e w i t h a s t a n d a r d t e s t m e t h o d a n d
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared
value(s) depending on the w ays in w hich the tool is used especially w hat kind of w orkpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
WARNING:
T h e d e c l a r e d v i b r a t i o n e m i s s i o n v a l u e i s u s e d f o r m a i n a p p l i c a t i o n s o f t h e p o w e r t o o l . H o w e v e r i f
the power tool is used for other applications, the vibration emission value may be different.
WARNING:
Grinding thin sheets of metal or other easily vibrating structures w ith a large surface can
result in a total noise emission much higher (up to 15 dB) than the declared noise emission values.
Set heavy flexible damping mats or such to those workpieces to prevent them from emitting sound.
Take the increased noise emission into consideration for both the risk assessment of noise exposure and
selecting adequate hearing protection.
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
t o t h i s i n s t r u c t i o n m a n u a l .
SAFETY WARNINGS
General pow er tool safety w arnings
WARNING:
Read all safety w arnings, instruc-
tions, illustrations and specifications provided with this
po w er tool. F a i l u r e t o f o l l o w a l l i n s t r u c t i o n s l i s t e d b e l o w
may result in electric shock, fire and/or serious injury.
Save all w arnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
( c o r d l e s s ) p o w e r t o o l .
Vibration emission (a ,
h
2
2.5 m / s o r l e s s
2
2.5 m / s o r l e s s
2
2.5 m / s o r l e s s
2
2.5 m / s o r l e s s
2
2.5 m / s o r l e s s
2
2.5 m / s o r l e s s
Vibration emission (a ,
h
2
2.5 m / s o r l e s s
2
2.5 m / s o r l e s s
2
2.5 m / s o r l e s s
2
2.5 m / s o r l e s s
2
2.5 m / s o r l e s s
2
2.5 m / s o r l e s s
Cordless grinder safety w arnings
Safety w arnings common for grinding, sanding,
wire brushing, or cutting-off operations:
1. This pow er tool is intended to function as a
grinder, sander, wire brush, or cut-off tool. Read
all safety w arnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Operations such as polishing or hole cutting
2.
are not to be performed w ith this pow er tool.
O p e r a t i o n s f o r w h i c h t h e p o w e r t o o l w a s n o t d e s i g n e d
may create a hazard and cause personal injury.
3 . Do not convert this po w er tool to operate in
a way which is not specifically designed and
specified by the tool manufacturer. S u c h a c o n -
version may result in a loss of control and cause
serious personal injury.
4 . Do not use accessories w hich are not spe-
cifically designed and specified by the tool
manufacturer. Just because the accessory can
be attached to your power tool, it does not assure
s a f e o p e r a t i o n .
11 ENGLISH
2
) : (m/s ) Uncertainty (K) : (m/s
AG
1.9
1.9
1.9
1.9
1.9
1.9
2
) : (m/s ) Uncertainty (K) : (m/s
AG
1.5
1.5
1.5
1.5
1.5
1.5
2
)
2
)