Ppb 30 Rc Service Menu - Maico PPB 30 O Montageanleitung

9 Commissioning

9.4 PPB 30 RC service menu

Bold Factory settings
LED flashes quickly
PPB 30 RC LEDs
The orange
operating
mode LED
flashes 1x per
cycle
The orange
operating
mode LED
flashes 2x per
cycle
The orange
operating
mode LED
flashes 3x per
cycle
The orange
operating
mode LED
flashes 4x per
cycle
Bold Factory settings
Parameters Set value Setting / description
Operating 1
modes 2
Sensor 0
1
2
Ventilation 0
levels 1
Selection of 1
auto/manual de-
humidification 2
function
3
4
LED flashes slowly
Automatic operation (red LED 1x)
system operation (red LED 2x)
Two operating modes can be selected here.
Automatic operation: Unit usually works
autonomously according to internal sensor.
System operation: The unit usually works ac-
cording to the controller specifications. For
more detailed description → Operating in-
structions.
inactive (red LED OFF)
active 40 % - 70 % r. h. (red LED 1x)
active 45 % - 80 % r. h. (red LED 2x)
The limit values of the integrated humidity
sensor can be set or deactivated here.
Ventilation levels Off possible (red LED
OFF)
Ventilation level Off blocked (red LED 1x)
With the ventilation level "0" blocked setting,
the ventilation units cannot be switched off on
this control. The units then run with at least
ventilation level 1.
Exhaust air mode Automatic / Manual exhaust
air mode (red LED 1x)
Automatic exhaust air mode / Manual intens-
ive ventilation (red LED 2x)
Automatic intensive ventilation / Manual ex-
haust mode (red LED 3x)
Automatic intensive ventilation / Manual in-
tensive ventilation (red LED 4x)
The dehumidification function for the sensor
(Auto) and for the button (Manual) can be set
here.
49