Transporting - Honda HSS1380 Bedienungsanleitung

TRANSPORTING

10.
Before loading
1. Loading the snowblower on a trailer should be performed on a firm,
level surface.
2. Use a loading ramp that is strong enough to support the combined
weight of the snowblower and the operator:
Weight of snowblower: Operating weight
HSS970
115 kg (254 lbs)
: ET
125 kg (276 lbs)
: ETS
105 kg (231 lbs)
: EW
120 kg (265 lbs)
: EWS
3. The loading ramp must be long enough so that its slope is 15° (26%)
or less:
4. If the snowblower is to be transported on a truck having a hood,
check that the distance between the truck bed and hood is 1.5 m (5
ft) or more. Remove the discharge chute if the distance is less than
1.5 m (5 ft).
5. Before loading, check that there is sufficient fuel in the tank. Engine
may stall on the ramp if there is little fuel in the tank.
66
HSS1380
130 kg (287 lbs)
: ET
140 kg (309 lbs)
: ETS
Length of
Ramp ( )
Height (h)
h
2.5 m 3.0 m
(8.2 ft) (9.8 ft)
50 cm 60 cm
(1.6 ft) (2.0 ft)
3.5 m
(11.5 ft)
70 cm
(2.3 ft)