Chapter 2: Safety; Information For The Operator; Obligations Of The Operator - Fluke VIBRONET Signalmaster Installationsanleitung

Chapter 2: Safety

VIBRONET Signalmaster was designed and built in strict compliance
with the required harmonized standards and other technical speci-
fications. The system therefore conforms to the state of the art and
ensures maximum safety.
Nevertheless, dangers can arise during installation and must be
avoided.
Please always comply with the general safety instructions in this
chapter and with the safety instructions in the other chapters of this
manual. The safety instructions explain how to protect yourself and
other persons as well as property and equipment from harm.
The owner / operator shall be responsible for damage and injuries
resulting from failure to comply with the information in this manual.

2.1 Information for the operator

Obligations of the operator

During operation of the system, maximum safety can only be achieved
if all necessary measures are taken. It is the obligation of the operator
to ensure that these measures are properly planned and implemented.
In particular, you must ensure that
- the system is used only for its intended purpose.
- the system is operated only when in proper working condition.
- the system is installed only by sufficiently qualified and authorized
personnel.
- the responsibilities for installation, commissioning and operation
have been defined.
Compliance with the installation manual
You must ensure that this manual
- is read, understood and complied with by the installation person-
nel for all work to be performed
- is stored in the immediate vicinity of the system and is available to
the installation personnel at all times
- is handed over to any future owner of the system.
Training
Instruct the installation personnel regularly on the application of all
safety regulations in safety instructions. It is your obligation to ensure
compliance with all safety instructions.
You must also ensure compliance with all general statutory and other
binding safety and accident prevention regulations, as well as the
general safety instructions and specific warnings.
Ensure that the installation personnel works in a safety-conscious
manner.
9
Safety