HIKMICRO SP-Serie Schnellstartanleitung Seite 13

Steps:
1. Put one or two batteries in the charging base.
2. Connect the supplied charging base to the power supply. The indicator
in the middle is green if it works properly.
3. The left and right indicators show the charging status of the batteries.
Solid red: charging normally.
Solid green: fully charged.
4. Draw the battery from the charging base, and disconnect charging base
from the power supply.
5. Change Interchangeable Lens (Optional) (Page 5 – D)
Steps:
1. Press the lens release button and turn the interchangeable lens
anticlockwise until it stops.
2. Remove the interchangeable lens carefully.
3. Align the two white index marks on the device and the lens.
4. Push the lens into position.
5. Rotate the lens clockwise to fix it. The lens makes a click when it locks
in place.
6. Tilt Lens and Screen (Page 6 – E)
You can tilt the lens and screen, as shown in page 6 – E.
7. Mount Hand Strap (Page 6 – F)
Steps:
1. Thread the hand strap through the hand strap clutch.
2. Thread one end of the hand strap through the two hand strap
attachment points.
3. Thread hand strap through the hand strap buckle (as shown in the
picture), and fasten the hand strap.
4. Adjust the tightness of the hand strap as needed.
11