Description Of The Device Components - DJO ARTROMOT-S4 Gebrauchsanleitung

2.1 Description of the device
components
Note: Please fold out page II!
1. Programming unit
(type B applied part)
2. Patient chip card
3. Compartment for storage of program-
ming unit
4. Armrest for healthy arm
5. Height adjustment of armrest
for healthy arm
6. Width adjustment of armrest
for healthy arm
7. Wheels
8. Crank handle for height adjustment (ro-
tational axis motor A and B)
9. Crank handle for adjustment of shoulder
width (rotational axis motor A and B)
10. Crank handle for adjusting the depth of
the backrest (rotational axis motor A)
11. Motor A (with control keys)
12. Motor B (with control keys)
13. Motor C (with control keys)
14. Swivel arm – motor A
15. Receiving tube for length adjustment
(upper arm)
16. Clamping lever for length adjustment
(upper arm)
17. Insertion tube for length adjustment
(upper arm)
18. Locking screw for elbow angle range
19. Elbow support
20. Forearm support
(type B applied part)
21. Strap for forearm restraint
22. Receiving tube for length adjustment
(forearm)
23. Clamping lever for length adjustment
(forearm)
24. Insertion tube for length adjustment
(forearm)
25. Hand rest (type B applied part)
26. Clamping lever for length adjustment
(forearm support)
27. Length adjustment of forearm support
28. Headrest with ball joint
29. Adjustment for depth of headrest
30. Backrest
31. Seat
32. Motion element
33. Thumbscrew for mounting the motion
element on the system rack
34. Width adjustment and lateral mounting
of motion element
35. System rack
36. Connection backrest/system rack
37. Control cable motor C
38. Control cable motor B
39. Control cable motor A
40. Connection for motor control cable or
control pendant
41. Connection for motor control cable or
control pendant
42. Connection for power cord
43. Power switch (ON/OFF)
44. Instrument fuse
45. Thumbscrew for mounting the system
rack
Subject to change without notice.
Note!
– The motion element (32), with the
integrated motors A-C (11-13), the
length settings (15-17, 27) and the arm
support assemblies (19, 20, 25), is the
moving application part within the
meaning of IEC 80601-2-78.
– As of serial number: 2,000
The legs of the device chair are
removable to enable space-saving
shipping. For assembly and disas -
sembly of the legs of the device chair,
see Chapter 6.3 „Transport" – 6.3.2.
„Packed – dismantled state".
63