Sartorius YDK03MS Betriebsanleitung Seite 11

4.3.3 Selecting the Beaker and Immersion Device
Procedure
Select the beaker or immersion device .
t
The selection of the beaker or immersion device
depends on the sample which is to be determined .
Overview of the beaker and immersion device:
− For determining the density of solid objects
whose density is higher than the immersion liquid:
A beaker with d 90 mm and a sample holder is
required
− For determining the density of solid objects
whose density is lower than the immersion liquid:
A beaker with d 90 mm and a sample pan is
required
− For determining the density of liquids: A beaker
with d 55 mm and a glass plummet is required
Operating Instructions YDK03MS | YDK04MS
Installation
11