Meec tools 000134 Gebrauchsanleitung Seite 52

EN
• Do not use the power tool if it cannot be switched on or off with
the power switch. Power tools that cannot be controlled with the
power switch are dangerous and must be repaired.
• Remove the battery before making any adjustments, changing
accessories or putting the power tool away. These safety
precautions reduce the risk of accidentally starting the tool.
• Store power tools out of the reach of children when not in use.
Never allow children, or anyone who is unfamiliar with the power
tool and these instructions, to use the tool. Power tools are
dangerous if used by inexperienced people.
• Keep the power tool properly maintained. Check that moving parts
are properly adjusted and do not jam, and that no parts are
incorrectly fitted or damaged. Check for other factors that could
affect functionality. If the power tool is damaged, it must be
repaired before being used again. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to jam and are easier
to use.
• Use the power tool, accessories, etc., in accordance with these
instructions, taking into account the actual working conditions and
the work that is to be done. It can be dangerous to use power tools
for purposes other than those they are intended to be used for.
Service
The power tool must only be serviced by qualified personnel using
identical spare parts. This will ensure that the power tool remains safe
to use.
Using and maintaining battery-powered tools
• The battery must only be charged with the charger recommended
by the manufacturer. A charger intended for one type of battery
52