Noise Pollution; Safety Notes For Rechargeable Battery And Charger; Safety Information When Working; Operator - AL-KO CS 1825 Betriebsanleitung

Safety instructions
■
Only operate the tool at the motor speed re-
quired for the respective work. Avoid using
the maximum speed in order to reduce noise
and vibrations.
■
The noise and vibrations of the tool may in-
crease due to improper use and mainte-
nance. This leads to health damage. In this
case, immediately switch off the tool and
have it repaired by an authorised service
workshop.
■
The degree of stress due to vibration de-
pends on the work to be performed or on the
use of the tool. Estimate the stress and plan
appropriate work breaks. This considerably
reduces stress due to vibration over the en-
tire working time.
■
Extensive use of the tool exposes the opera-
tor to vibrations, which can lead to circulatory
issues ("white fingers"). To avoid this risk,
wear gloves and keep your hands warm. If
any symptoms of "white fingers" occur, im-
mediately consult a physician. These symp-
toms include: Numbness, loss of feeling, tin-
gling, itching, pain, reduced muscular
strength, changes in the colour or condition
of the skin. Normally these conditions affect
the fingers, hands or pulse. The risk increas-
es at low temperatures.
■
Take long breaks during your working day so
you can recover from the noise and the vibra-
tions. Plan your work in such a way that the
use of appliances that generate strong vibra-
tions is spread over several days.
■
If you notice an unpleasant sensation or disc-
olouration of the skin on your hands when us-
ing the tool, stop work immediately. Take suf-
ficient work breaks. Without sufficient breaks,
a hand/arm vibration syndrome can occur.
■
Minimise your risk of being exposed to vibra-
tions. Maintain the tool according to the in-
structions in the operating instructions.
■
If the tool is used frequently, contact your
dealer to purchase anti-vibration accessories
(e.g. handles).
■
Avoid working with the tool at temperatures
below 10 °C. Define how the vibration load
can be limited in a work plan.
3.6

Noise pollution

A certain level of noise exposure from this appli-
ance is inevitable. Carry out noisy work at ap-
proved and specified time periods. Observe rest
periods as necessary and restrict the duration of
443162_a
the work to a minimum. For your personal protec-
tion and protection of persons in the vicinity, ap-
propriate hearing protection must be worn.
3.7 Safety notes for rechargeable battery
and charger
Please observe the safety instructions for the re-
chargeable battery and the charger in the sepa-
rate operating instructions.
See:
■
Operating instructions 443130: rechargeable
batteries
■
Operating instructions 443131: chargers
3.8

Safety information when working

■
Heed the country-specific safety regulations,
e.g. from the relevant trade associations, so-
cial security systems, authorities for industrial
safety.
■
Only work in sufficient daylight or artificial
lighting.
■
Keep the working area free from objects (e.g.
off-cuts) – danger of stumbling.
■
The user is responsible for accidents involv-
ing other people and their property.
■
If you are working with a chain saw for the
first time:
■
Have the salesperson or another expert
explain the operation of the chain saw, or
attend a course.
■
Prior to the first use, at the very least
practice cutting round wood on a saw
frame or stand.
3.8.1

Operator

■
Young people under 16 years of age and
people who do not know the operating in-
structions are not allowed to use the tool.
■
To operate the chain saw, you must be rest-
ed and in good physical and mental health. If
you must not exert yourself for health rea-
sons, ask your doctor whether it is possible to
work with a chain saw.
3.8.2

Operating times

Heed the country-specific regulations for the op-
erating times of chain saws. The operating times
of chain saws can be limited by national and local
regulations.
37