ratiotec rapidcount M 120 Bedienungsanleitung Seite 22

Printing the counting summary:
Connect a receipt printer to the back of the machine. Press and hold the MODE key and select the Printer
Settings option with the SET key. Adjust the Baud Rate to 9600 bps with the SET key. Exit the menu with
START / RESET. To print the counting summary press the SAVE / PRINT key.
Functions
Batch function:
With the Batch function you can count batches of banknotes with a predefined amount, for example to
make bundles. Pressing the BATCH key you can choose between preset amounts of banknotes: 0, 10, 20,
25, 50 or 100. Pressing C sets the batch amount back to zero and deactivates the function. If you prefer to
set a particular batch amount, press C and enter the desired amount between 1 and 999 with the number
keys.
When the counted banknotes reach the amount of the batch, the display shows an exclamation mark and
the message "Batch Full!". Remove the banknotes from the stacker to continue the counting procedure.
Counterfeit detection:
In the Euro and GBP modes the testing of UV, Infrared and Magnetic features is by default activated. In or-
der to change these settings, press and hold the MODE key. Navigate with MODE to the option "CF Lock"
and change it to "Unlock" with the SET key. In the Euro and GBP modes you can adjust the counterfeit
detection settings as follows: