Risk Of Electric Shock - Corradi ERMETIKA Benutzerhandbuch

® ®
Ermetika , Ermetika XL
Precipitation safety
snow and frost
n
Operation during ice conditions can damage the product.
In the presence of ice/snow it is necessary to thoroughly clean the runners before moving the canvas.
Risk of shearing/crushing
A height of passage lower than 2.5 m can generate the risk of shearing/crushing between the mobile part and the fixed part of the
framework.
The presence of the person commanding the movement is always mandatory until the end of the movement to make sure that there are
no obstacles or people in the vicinity of the area of potential danger.

Risk of electric shock

The inspection, maintenance or repair of electrical components should be performed by qualified personnel only, making sure the product
is fully disconnected from the power supply. There is in fact a danger of fatal electric shock.
Frequently examine the installation, check for any signs of wear or damage to the cables.
Do not use if a repair is necessary.
If not used for a long period of time, protect the visible mechanical parts.
Rev.13 - 09.2018 CORRADI SRL - USER MANUAL 11 of 16