Cleaning The Device; Installing The Draft Shield; Installing The Analytical Draft Shield; Installing The Round Draft Shield - Sartorius Entris BCE series Betriebsanleitung

Cleaning and Maintenance
9.2

Cleaning the Device

NOTICE
Corrosion or damage to the device due to unsuitable
cleaning agents.
Do not use corrosive, chloride-containing, or aggressive
t
cleaning agents .
Do not use cleaning agents that contain abrasive
t
ingredients, e .g . scouring agents, steel wool .
Do not use solvent-based cleaning agents .
t
Only use suitable cleaning agents (materials, see Chapter
t
"15 .6 Materials", page 37) and observe the product
information for the cleaning agent used .
Procedure
NOTICE Malfunction or damage to the device due to the
t
ingress of moisture or dust .
Only slightly moisten cleaning materials, such as cloths .
t
Remove dust and powdery sample residue with a brush
t
or hand-held vacuum cleaner .
Wipe the device and the associated components with a
t
slightly damp cloth . Use a mild soapy solution or a suitable
cleaning agent for more severe contamination .
9.3

Installing the Draft Shield

9.3.1

Installing the Analytical Draft Shield

Procedure
If this relates to a device with a shield disk: Install the shield
t
disk, the pan support, and the weighing pan .
If this relates to a device without a shield disk: Install the
t
pan support and the weighing pan .
Connect the device to the power supply (see Chapter "6 .2
t
Connecting the Power Supply", page 17) .
32 Entris ® BCE Operating Instructions
Slowly slide the side panels
t
and the upper panel into
the frame rails .
Hold the handles on the
t
side panels or the upper
panel from the outside and
fasten to the inner side with
the screws .
9.3.2

Installing the Round Draft Shield

Procedure
Install the draft shield (see Chapter "5 .4 .2 Installing a Device
t
with Round Draft Shield", page 16) .
Connect the device to the power supply (see Chapter "6 .2
t
Connecting the Power Supply", page 17) .
9.4

Maintenance Schedule

Interval Component Action
Regularly; depending on Device
the operating conditions
9.5

Software Update

For a software update, contact Sartorius Service .
Contact Sartorius
Service .