Audio Toggle
You can control audio routing (speaker/earpiece) for any private or group call through the dedicated S
key. You can also define through the menu to have all group calls in high audio or controlled by the S
key.
Setting Audio Toggle
Procedure:
1 From the home screen, press the
2 Select Setup → Audio → Audio Toggle.
3 Select one of the following:
a Always Loud — The audio sound comes from the speaker (high audio only).S
b Spkr Cntrl — The audio goes through the earpiece or the speaker. You can switch between low and high
audio by pressing S
Volume Adjustment Mode
You can set the volume to Individual or Common. When it is set to Individual, the volume level for Voice, Duplex,
Simplex, Earpiece, Speaker and Keypad can be set per user preferences. When set to Common, the audio has one
setting for all items.
Setting Volume Adjustment Mode
Procedure:
1 From the home screen, press the
2 Select Setup → Audio → Volume Adj. Mode.
3 Select one of the following:
•
Individual — You can set Duplex, Simplex, Earpiece, Speaker and Keypad per your preferences in M
→ Setup → Set Volume.
•
Common — You can set one value for all the items in M
Tones
This field sets the volume level for the tones set.
Keypad Tone
You can activate/deactivate keypad tone at every key press.
Setting Keypad Tone
Procedure:
1 From the home screen, press the
2 Select Setup → Tones → Keypad Tone.
3 Select one of the following:
•
On — Activates keypad tone.
•
Off — Deactivate keypad tone.
All Tones
You can activate/deactivate all tones.
key.
MENU
C
key.
PEAKER
ONTROL
key.
MENU
key.
MENU
PEAKER
→ Setup → Set Volume.
ENU
Main Menu | 81
C
PEAKER
ONTROL
C
PEAKER
ONTROL
C
key is disabled.
ONTROL
ENU
| |
Send Feedback