Use; Controls - ETNA AIP590RVS Bedienungsanleitung

USE

Controls

5
1
Timer
4
EN 6
2
1 2
Switching fan on and off
• Press the '+' / '>' button (2).
The fan switches on at setting 1.
• Press the '+' / '>' button (2) again.
The fan switches to a higher speed. After speed three the fan
switches to an intensive setting. After +/- 5 minutes this switches
back to speed 3.
At each speed, the relevant setting is shown in the display (3).
• Press the '-' / '<' (1) button to switch off the fan.
The display counts down to '0' (every time the '-' / '<' button is
pressed) and then the fan switches off.
Switching lighting on and off
• Press the lighting button (5).
The lighting switches on.
Adjust the brightness of the lighting with the upper and lower arrow of
the remote control.
• Press the lighting button (5).
The light goes off.
3 4 5