Toyota 06-8FD15F Fahrerhandbuch Seite 36

en-36
Seat belt
To fasten your seat belt, insert the tab into
the buckle.
You will hear a click when the tab locks
into the buckle. Tug the belt to make sure
the buckle is securely coupled.
Adjust the seat belt length to your size as
necessary.
Disconnecting method
Push the release button and pull out the
belt from the buckle.
Caution Caution
• When the operator leaves the seat,
insert the safety belt tab into the
buckle.
• Stop the engine when you open the
engine hood.
• When you start the engine, fasten
the seat belt.
Warning
• Buckle up. Your safety belt can
reduce the risk of serious injury or
death in case of a truck tipover. Your
chances for avoiding serious injury
or death in a tipover are better if you
stay with the truck in the operator's
compartment.
• Always fasten your safety belt for
driving the truck. The truck can be
tipped over if operated improperly.
To protect operators from the risk of
serious injury or death in the event
of a tipover, it is best to be held
securely in the seat.The safety belt
will help to keep you safely within
the truck and operator's
compartment. In the event of a
tipover, don't jump, grip the steering
wheel, brace your feet, lean away
from the direction of tipover, and
stay inside the truck.
(1)
(1) Engine hood lock release lever
(1)
(1) Push
Engine hood
Opening
1. Pulling up on the engine hood lock
release lever will release the engine
hood lock, and the engine hood will
pop up slightly.
2. Lift the engine hood.
3. Open the engine hood all the way,
then shake the hood slightly to check
that the hood damper has been
securely fastened before letting go.
Closing
1. Lift up the engine hood, press the
hood damper lock to release the lock.
2. Close the engine hood quietly, and
press down on the hood until you
hear a clicking sound.
Caution Caution
Working on the engine without firm
locking of the hood may be hazardous.