B. Braun Aesculap Spine activ L FW961R Gebrauchsanweisung/Technische Beschreibung Seite 4

Aesculap Spine
activ L insertion instrument
Legend
1 Spacer
2 Clamp
3 Clamping sleeve
4 Insertion instrument handle
5 Slotted-hole pin
6 Coupling pin
7 Superior prosthesis plate
8 Polyethylene inlay
9 Inferior prosthesis plate
10 Unlocking button for spacer
11 Twist cap
Symbols on product and packages
Symbol Explanation
Caution, general warning symbol
Caution, see documentation supplied
with the product
Intended use
The activ L insertion instrument is used for implanting
the intervertebral disc prosthesis through anterior (0°)
or lateral (approx. 45°) approach. Different color-
coded and labeled insertion instruments are used for
implants of different height.
Available sizes
Art. no.
FW961R
FW962R
FW963R
FW964R
2
Size
8.5 mm
10 mm
12 mm
14 mm
Safe handling and preparation
CAUTION
Federal law restricts this device to sale by or on
order of a physician!
Ensure that the product and its accessories are
operated and used only by persons with the requi-
site training, knowledge, or experience.
Read, follow, and keep the instructions for use.
Use the product only for its intended purpose, see
Intended use.
Remove the transport packaging and thoroughly
clean the new product, either by hand or using a
machine, prior to its initial sterilization.
Store any new or unused products in a dry, clean,
and safe place.
Prior to each use, inspect the product for: loose,
bent, broken, cracked, worn,
components.
Do not use the product if it is damaged or
defective. Set aside the product if it is damaged.
Replace any damaged components immediately
with original spare parts.
Safe operation
Risk of injury and/or malfunction!
Always carry out a function
check before using the product.
WARNING
Coupling the implant
Select the appropriate insertion instrument
according to the height of the intervertebral disc
prosthesis.
Completely assemble the intervertebral disc
prosthesis.
or fractured