Using The Stove; Clock Settings - ADURO P4 Bedienungsanleitung

6. Using the stove

First, make sure the stove is connected to the power source and the chimney.
Second, turn on the stove using the main switch on the back side.
From here on, the description will follow the button layout of the display on the stove.
6.1 Turning the stove on and off
Press and hold button 4 to turn on the stove. The current status will switch to START and later to WAIT,
LOAD PELLET and FLAME WAIT.
Several bars will appear next to the component indicators currently working as for instance the igniter, the
exhaust fan and the auger.
As soon as the exhaust gases have reached a temperature of 80°C, the current status will switch to WORK.
Every 30 minutes, the stove will clean the brazier by blowing more air through the combustion chamber.
To turn off the stove, press and hold button 4 until the status switches to FINAL CLEANING. The pellet
insertion will stop immediately while more air will circulate through the combustion chamber in order to clean
the brazier. This process will take 10-20 minutes.
6.2 Temperature and mode settings
The temperature can be set to anything between 7 and 40°C. Use the buttons 1 and 2 to increase or
decrease the wanted room temperature.
The mode can be set to anything between P1 and P5. Use the buttons 5 and 6 to increase or decrease the
power mode. The higher the power mode, the faster the wanted temperature will be reached. Once the set
temperature is reached, the stove will regulate the power mode accordingly in order to maintain the wanted
temperature.
7. Settings
In order to access the general programming menu, press button 3. Use the buttons 5 and 6 to navigate
through the menu and button 3 to confirm and enter. Use the buttons 1 and 2 to change parameters within
the selected menu. Press button 4 to exit.

7.1 Clock settings

Enter the menu by pushing button 3. The display now shows the message 01 SET CLOCK. Confirm with
button 3.
Use the buttons 1 and/or 2, to choose the correct weekday.
58