Requirements For Installation - Dometic COOLAIR SPX1200T Technische Daten/Montagevoraussetzungen

Requirements for installation

Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order to ensure that you install, use,
and maintain the product properly at all times. These instructions MUST stay with this product.
By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you understand and agree to abide by
the terms and conditions as set forth herein. You agree to use this product only for the intended purpose and application and in accordance with the instructions,
guidelines, and warnings as set forth in this product manual as well as in accordance with all applicable laws and regulations. A failure to read and follow the
instructions and warnings set forth herein may result in an injury to yourself and others, damage to your product or damage to other property in the vicinity. This
product manual, including the instructions, guidelines, and warnings, and related documentation, may be subject to changes and updates. For up-to-date prod-
uct information, please visit documents.dometic.com.
Contents
1 Requirements for installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.1
1.2
1.3
1.4
1.5
1.6
1 Requirements for installation
1.1 General
The parking cooler is not suitable for installation in construction machines, agri-
cultural machines or similar equipment. They will not work properly if exposed to
strong vibrations.
The parking cooler may only be fitted to vehicles with sufficient suspension, such
as spring-loaded truck cabs or transporters or vans.
As the parking cooler uses R134a as refrigerant with a GWP >150, there may be
national restrictions for the installation of the appliance on certain vehicles (e.g.
EU MAC directive 2006/40/EC). Please check in advance whether the national
requirements permit the installation of the parking cooler on your vehicle.
The roof of your vehicle must be designed for the static weight of the SPX parking
cooler and for the loads produced by the parking cooler when the vehicle is sta-
tionary and when the vehicle is moving. If a roof cutout is required (e.g. if there is
no existing roof hatch opening or the roof hatch opening is not suitable and can-
not be used), it is mandatory to check with the manufacturer of your vehicle
whether this is permissible and what must be observed to ensure that the vehi-
cle's registration does not expire.
After installation of the parking cooler, the total vehicle height including the park-
ing cooler must not exceed 4 m.
The weights of the parking coolers totals are:
• SPX1200T: approx. 23 kg
• SPX1200I: approx. 15 kg
• SPX1200C: approx. 21 kg
8
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Electrical requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Constructional requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
SPX1200T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
SPX1200I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
SPX1200C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
SPX1200T, SPX1200C, SPX1200I
EN