Skandika Nemo IV Bedienungsanleitung Seite 29

Step 3
1. Connect sensor wire (No. 56) to connection wire (No. 96).
2. Place the front cover (26F) into the hole of main frame (1).
3. Fix the computer (No. 54) with 4 screws (No. 68).
Step 3
1. Connect sensor wire (No. 56) to connection wire (No. 96).
2. Place the front cover (26F) into the hole of main frame (1).
3. Fix the computer (No. 54) with 4 screws (No. 68).
#68 M8*15 4pcs #68 M8*15 4pcs
#93 S5 #93 S5
Adjust the angle of computer Adjust the angle of computer
29
ASSEMBLY INSTRUCTIONS
68 68
After 3 turns of anticlockwise release, After 3 turns of anticlockwise release,
adjust the computer angle to a suitable position, adjust the computer angle to a suitable position,
and then lock clockwise. and then lock clockwise.
68 68
26F 26F
96 96
56 56
1 1
Release Release
Locking Locking