Setting The Duration - Electrolux EOB6640AAX Benutzerinformation

12 www.electrolux.com
Clock function
00:00
6.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press
2. Press
the minutes.
The display shows
hour. "00" flashes.
3. Press
minutes.
4. Press
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day

6.3 Setting the DURATION

1. Set an oven function.
2. Press
starts to flash.
3. Press
and the hours for DURATION time.
4. Press
When the time ends an acoustic signal
sounds for 2 minutes.
All manuals and user guides at all-guides.com
Application
TIME DELAY To combine DURATION and END function.
MINUTE MINDER Use to set a countdown time. This function has no
effect on the operation of the appliance. You can set
the MINUTE MINDER at any time, also if the appli‐
ance is off.
COUNT UP TIM‐ If you do not set any other clock function the
ER COUNT UP TIMER automatically monitor how long
the appliance operates. It is on immediately when
the oven starts to heat.
The Count Up Timer cannot be used with the func‐
tions: DURATION, END.
and
or to set the hours.
to confirm and switch to set
and the set
or to set the current
to confirm or the set time of
flashes in the display.
again and again until
or to set the minutes
to confirm.
and time
setting flash in the display. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
6.4 Setting the END
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or to set the hours and
the minutes for END time.
4. Press to confirm.
At the set time an acoustic signal sounds
for 2 minutes. and time setting flash
in the display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
6.5 Setting the TIME DELAY
function
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or to set the minutes
and the hours for DURATION time.
4. Press to confirm. The display
shows flashing .