Clock Functions; Setting The Duration - Electrolux EOB2430AOX Benutzerinformation

5.4 Display
5.5 Buttons
Button

6. CLOCK FUNCTIONS

6.1 Clock functions table
Clock function
6.2 Setting and changing the
time
You must set the time before you
operate the oven.
The
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
Press the
time.
Downloaded from www.Manualslib.com
A B
Function
MINUS
CLOCK
PLUS
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MIND‐
ER
flashes when you connect the
or to set the correct
manuals search engine
A. Function indicators
C
B. Time display
C. Function indicator
Description
To set the time.
To set a clock function.
To set the time.
Application
To set, change or check the time of day.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To set countdown time. This function has no effect on
the operation of the appliance.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time of day press
again and again until

6.3 Setting the DURATION

1. Set an oven function and
temperature.
2. Press
starts to flash.
ENGLISH
starts to flash.
again and again until
9