Setting The Duration - Electrolux EOB6640AAX Benutzerinformation

12 www.electrolux.com
Clock function
6.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press
2. Press
The display shows
hour. "00" flashes.
3. Press
4. Press
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day

6.3 Setting the DURATION

1. Set an oven function.
2. Press
3. Press
4. Press
When the time ends an acoustic signal
sounds for 2 minutes.
Downloaded from www.Manualslib.com
TIME DELAY
MINUTE MINDER Use to set a countdown time. This function has no
00:00 COUNT UP TIM‐
ER
or to set the hours.
to confirm and switch to set
the minutes.
and the set
or to set the current
minutes.
to confirm or the set time of
day will be saved automatically after
5 seconds.
flashes in the display.
again and again until
starts to flash.
or to set the minutes
and the hours for DURATION time.
to confirm.
and time
manuals search engine
Application
To combine DURATION and END function.
effect on the operation of the appliance. You can set
the MINUTE MINDER at any time, also if the appli‐
ance is off.
If you do not set any other clock function the
COUNT UP TIMER automatically monitor how long
the appliance operates. It is on immediately when
the oven starts to heat.
The Count Up Timer cannot be used with the func‐
tions: DURATION, END.
setting flash in the display. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
and
to the off position.
6.4 Setting the END
1. Set an oven function.
2. Press
starts to flash.
3. Press
the minutes for END time.
4. Press
At the set time an acoustic signal sounds
for 2 minutes.
in the display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
6.5 Setting the TIME DELAY
function
1. Set an oven function.
2. Press
starts to flash.
3. Press
and the hours for DURATION time.
4. Press
shows flashing
again and again until
or to set the hours and
to confirm.
and time setting flash
again and again until
or to set the minutes
to confirm. The display
.