Emptying The Water Tank; Clock Functions - Electrolux EOB6640AAX Benutzerinformation

5.10 Emptying the water tank

1. Prepare the draining pipe (C),
2. Put the second end of the draining

6. CLOCK FUNCTIONS

6.1 Clock functions table
Clock function
Downloaded from www.Manualslib.com
If you put too much water
into the tank, the safety
outlet moves the excess
water to the bottom of the
oven.
Remove the water with a
sponge or a cloth.
CAUTION!
Make sure that the appliance
is cool before you start to
empty the water tank.
included in the same package with
the user manual. Put the connector
(B) onto one of the ends of the
draining pipe.
pipe (C) into a container. Put it at a
lower position than the outlet valve
(A).
A
B
C
TIME OF DAY
DURATION
END
manuals search engine
3. Open the oven door and put the
connector (B) into the outlet valve
(A).
4. Push the connector again and again
when you empty the water tank.
The water tank can have
some water when the
display shows
symbol. Wait until the
water flow from the
water outlet valve stops.
5. Remove the connector from the valve
when the water stops flowing.
Do not use the drained water
to fill the water tank again.
Application
To show or change the time of day. You can change
the time of day only when the appliance is off.
To set how long the appliance operates. Use only
when an oven function is set.
To set when the appliance deactivates. Use only
when an oven function is set.
ENGLISH 11