Faber CHLOE EV8P OM A70 Gebrauchsanleitung Seite 5

• Clean the hood using a damp
cloth and a neutral liquid de-
tergent.
Controls
L
Button Function
Turns the lights on/off at maximum strength.
L
Press and hold the button for approximately 2 seconds to turn the Courtesy
Lights On/Off.
T1 Turns the motor on/off at speed one.
Turns the Motor on at speed two.
T2
Press and hold the button for approximately 5 seconds, with all the loads
turned off (Motor and Lights), to turn the Activated Charcoal Filter alarm on.
To turn the alarm off, press the button again and hold for at least 5 seconds.
T3 Turns the Motor on at speed three.
Press and hold the button for approximately 3 seconds, with all the loads turned
off (Motor and Lights), to perform a reset. The LED S1
Turns the Motor on at INTENSIVE Speed.
T4
This speed is timed to run for 6 minutes. At the end of this time, the system
returns automatically to the speed that was set before. If it is activated with the
motor turned off, the hood will switch to OFF at the end of the time.
Press and hold for 5 seconds to enable the remote control, indicated by the
Press and hold for 5 seconds to disable the remote control, indicated by the
S1 Signals the Metal Grease Filter saturation alarm, indicating that it is necessary
for 100 working hours.
When this is activated, it signals the Activated Charcoal Filter saturation alarm,
be washed. The Activated Charcoal Filter saturation alarm comes into operation
after the Hood has been working for 200 hours.
T1 T2 T3 T4
S1
Led
-
-
-
-
Flashing
-
Flashing
-
Flashing
Fixed
Flashing
5