Opening The On-Screen Display Via Double Keypress - G&D VisionXS-IP-C-DP-UHR Installation Und Bedienung

Configuration

Opening the on-screen display via double keypress

As an alternative to opening the on-screen display (OSD) with the hotkey
key+Num or Double hotkey+Num
key twice.
How to enable/disable the activation of the on-screen display via double key-
press:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under OSD via 2x keypress
 OSD cannot be opened via double keypress (default)
Off
 OSD is opened by pressing the Ctrl key twice
Ctrl
Alt  OSD is opened by pressing the Alt key twice
Alt Gr  OSD is opened by pressing the Alt Gr key twice
Win  OSD is opened by pressing the Windows key twice
Shift  OSD is opened by pressing the Shift key twice
Print  OSD is opened by pressing the Print key twice
5. Press F2 to save your settings.
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click
on Configuration
3. Click on the tab
4. In the
OSD via double keypress
options:
Off  OSD cannot be opened via double keypress (default)
Ctrl  OSD is opened by pressing the Ctrl key twice
Alt  OSD is opened by pressing the Alt key twice
Alt Gr  OSD is opened by pressing the Alt Gr key twice
Win  OSD is opened by pressing the Windows key twice
Shift  OSD is opened by pressing the Shift key twice
 OSD is opened by pressing the Print key twice
PrtSc
5. Click on Save
33 · G&D VisionXS-IP-C-DP-UHR
you can also open the OSD by pressing a configured
(default) to open the on-screen display.
System setup and press
Hotkey and press
select one of the following options:
KVM extender
.
General and then on the tab
field, you can select between the following
.
Enter .
Enter .
.
CPU .
Hot-