Opening the on-screen display via double keypress
As an alternative to opening the on-screen display (OSD) with the hotkey
key+Num
or
Double hotkey+Num
key twice.
How to enable/disable the activation of the on-screen display via double key-
press:
1. Press
Ctrl+Num
2. Select the row
3. Select the row
4. Under
OSD via 2x keypress
Off
OSD cannot be opened via double keypress (default)
OSD is opened by pressing the Ctrl key twice
Ctrl
Alt
OSD is opened by pressing the Alt key twice
Alt Gr
OSD is opened by pressing the Alt Gr key twice
OSD is opened by pressing the Windows key twice
Win
Shift
OSD is opened by pressing the Shift key twice
OSD is opened by pressing the Print key twice
Print
5. Press
F2
to save your settings.
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click
on
Configuration
3. Click on the tab
4. In the
OSD via double keypress
options:
OSD cannot be opened via double keypress (default)
Off
Ctrl
OSD is opened by pressing the Ctrl key twice
OSD is opened by pressing the Alt key twice
Alt
OSD is opened by pressing the Alt Gr key twice
Alt Gr
Win
OSD is opened by pressing the Windows key twice
OSD is opened by pressing the Shift key twice
Shift
PrtSc
OSD is opened by pressing the Print key twice
5. Click on
Save
you can also open the OSD by pressing a configured
(default) to open the on-screen display.
and press
System setup
Hotkey
and press
Enter
select one of the following options:
.
KVM extender
.
and then on the tab
General
field, you can select between the following
.
.
Enter
.
.
CPU
G&D VisionXS-IP-F-DP-UHR · 34
Configuration
Hot-