1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click
on
Configuration
.
3. Click on the tab
General
4. Click on the tab
CPU
station (on the
CPU
Click on the tab
CON
workstation (on the
5. In the
Scancode set
ing options:
Set 2
activates scancode set 2 for PS/2 keyboard inputs
activates scancode set 3 for PS/2 keyboard inputs
Set 3
6. Click on
Save
.
7. Turn the KVM extender off and back on again.
After you turn the KVM extender on again, the keyboard is initialised and the
selected scancode set is applied.
.
KVM extender
.
if you want to configure the setting of the local work-
module).
if you want to configure the setting of the remote
CON
module).
field of the
Configuration
section, select one of the follow-
G&D VisionXS-IP-C-DP-UHR · 44
Configuration