Agilent TPS-compact Betriebsanleitung Seite 225

Technical Information
N. Read/ Data
Write Type
358 R/W N
406 R A
407 R A
500 Reserved to Agilent service
503 R/W N
504 R/W L
724 R/W N
725 R/W L
1
NOTE
2
3
Figure 75 Windows N. 206 Bit Description
Agilent TPS-compact User Manual
Description
Tip-seal life (R)
Tip-seal life reset (W)
Program Listing Code
Parameter Listing Code
RS 485 address
Serial type select
Run Up time (minutes)
Run Up time control
Automatic means that when the controller stops, the vent valve is opened with
a delay defined by window n. 126; when the controller starts, the vent valve is
immediately closed.
On command means that the vent valve is opened or closed by means of
window n. 122.
These commands remove the pump motor supply for a short time. If they are
used continuously, they can cause the pump stopping.
Admitted Values
0 = reset
"XXXXXXXXXX"
"XXXXXXXXXX"
0 to 31 (default = 0)
0 = RS 232
0.30 15
On = 1 1
Off = 0
225