Technical Data - DeWalt DCD776 Handbuch

EN GLI SH
CORDLESS COMPACT 13 mm (1/2") DRILL/DRIVER/
HAMMERDRILL
DCD734, DCD771, DCD776
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

DCD734 DCD771 DCD776
Voltage V 14.4
DC
Type 1/10
Battery Type Li-Ion
Power output W 250
No-load speed
1st gear min -1 0–400
-1
2nd gear min 0–1300
Impact rate
-1
1st gear min
2nd gear min -1
Max. torque
(hard/soft) Nm 38/22
Chuck capacity mm 1.5–13
Maximum drilling
capacity
Wood mm 30
Metal mm 10
Masonry mm
Weight (without
battery pack) kg 1.20
L (sound pressure) dB(A) 69
PA
K (sound pressure
PA
uncertainty) dB(A)
L (sound power) dB(A) 80
WA
K (sound power
WA
uncertainty) dB(A)
Vibration total values (triax vector sum) determined according to
EN 60745:
Vibration emission value a
h
Drilling into metal
a = m/s² < 2.5
h,D
Uncertainty K = m/s² 1.5
32
18 18
The vibration emission level given in this information
sheet has been measured in accordance with a
1/10 1/10
standardised test given in EN 60745 and may be
Li-Ion Li-Ion
used to compare one tool with another. It may be
300 300
used for a preliminary assessment of exposure.
0–450 0–450
0–1500 0–1500
– – 0–7650
– – 0–25,500
42/24 42/24
1.5–13 1.5–13
30 30
13 13
– – 13
1.28 1.34
72 85
3 3 3
83 96
3 3 3
< 2.5 < 2.5
1.5 1.5
Vibration emission value a
h
Screwdriving
a = m/s² < 2.5
h,ID
Uncertainty K = m/s² 1.5
Vibration emission value a
h
Drilling into concrete
a = m/s² –
h,D
Uncertainty K = m/s² –
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
< 2.5 < 2.5
1.5 1.5
– 14.0
– 2.4