Technical Data - DeWalt DCD709 Bersetzt Von Den Originalanweisungen

EnGLIsH
CORDLESS COMPACT 13 mm DRILL/DRIVER/HAMMERDRILL
DCD708, DCD709
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No‑load speed
1st gear
2nd gear
Beats per minute
1st gear
2nd gear
Max. Torque (hard/soft)
Chuck capacity
Maximum drilling capacity
Wood
Metal
Masonary
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑1:
L (emission sound pressure
PA
level)
L (sound power level)
WA
K (uncertainty for the given
sound level)
Drilling into metal
Vibration emission value a =
h,D
Uncertainty K =
Drilling into concrete
Vibration emission value a
h,ID
Uncertainty K =
Screwdriving
Vibration emission value
a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
26
WALT one of the
e
DCD708
V 18
DC
2
Li‑Ion
min‑1 0–450
min‑1 0–1650
–
–
Nm 65/26
mm 1.5–13
mm 30
mm 13
mm –
kg 1.10
dB(A) 72
dB(A) 83
dB(A) 5
m/s <2.5
2
m/s 1.5
2
= m/s –
2
m/s –
2
m/s <2.5
2
m/s 1.5
2
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
DCD709
from the effects of vibration such as: maintain the tool
18
and the accessories, keep the hands warm, organisation
2
of work patterns.
Li‑Ion
EC‑Declaration of Conformity
0–450
0–1650
0–7650
0–28050
65/26
1.5–13
D WALT declares that these products described under
e
Technical Data are in compliance with:
30
2006/42/EC, EN62841‑1‑2015+AC:2015, EN62841‑2‑
13
1:2018+A11:2019.
13
These products also comply with Directive 2014/30/EU and
1.20
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
86
97
3
Markus Rompel
Vice President of Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
3.3
65510, Idstein, Germany
1.5
06.12.2021
DECLARATION OF CONFORMITY
14.5
THE SUPPLY OF MACHINERY (SAFETY)
1.5
<2.5
1.5
WALT declares that these products described under Technical
D
e
Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841‑1‑2015+AC:2015, EN62841‑2‑1:2018+A11:2019.
Machinery Directive
Drill/Driver/Impact Drill
DCD708, DCD709
REGULATIONS 2008
Drill/Driver/Hammerdrill
DCD708, DCD709
WALT at
e
WALT.
e