Function Of Keys In The Configuration Level; Notes On The Basic And Additional Functions - bürkert POSITIONER 1067 Bedienungsanleitung

All manuals and user guides at all-guides.com
4 OPERATION
4.5.3 Function of keys in the confi guration level
Operation of the „Arrow up" key
- Scroll upwards in menu (selection).
- Incrementing numerical values in a selected and confirmed menu item.
Operation of the „Arrow down" key
- Scrolling downwards in the menu (selection).
- Decrementing numerical values in a selected and confirmed menu item.
Operation of the MANUAL/AUTOMATIC key within the main menu
- Confirmation of a selected menu item.
- Confirmation of a set value.
Operation of the MANUAL/AUTOMATIC key within the additional menu
- Confirmation of a selected menu item of the additional menu for inclusion in the main menu. The
selected menu item is marked with a star (*) in the additional menu. The menu item now appears in
the main menu where it can be selected and manipulated.
- Confirmation of a selected menu item of the additional menu, marked with a star, for deletion from the
main menu.

4.5.4 Notes on the basic and additional functions

X-SENS (factory setting: DIRECT): Specification of the type of information transfer between the conti-
nuous action valve (valve setting) and the travel measuring system.
Options:
DIRECT: There is a linear relationship between the valve position and the input signal
of the path-measuring system.
Examples:
Fitting the positioner to a piston valve (e.g. 2731) and using the external feedback/positional transdu-
cer (linear potentiometer) to measure the piston position. Here, the linear movement of the piston is
transformed into a linear movement of the potentiometer. A characteristic correction is therefore not
required.
Fitting the positioner to a flap valve with part-turn valve actuating drive (e.g. 3210) and using the
internal feedback/positional transducer (rotary potentiometer) to measure the flap position (see section
3.1.3 and Fig. 19). The rotary movement of the flap is converted into a proportional rotary movement of
the potentiometer. A characteristic correction is not required.
LEVER: There is a sinusoidal relationship between the valve position and the input
signal of the path-measuring system.
Example:
Fitting the positioner to a membrane valve (e.g. 265) and using the internal feedback/positional transdu-
cer (rotary potentiometer) to measure the valve position (see section 3.1.1 and
Fig. 7). Coupling is via a lever conforming to NAMUR. The linear movement of the membrane is trans-
formed into a rotary movement of the potentiometer. A sinusoidal curve results. In this option, therefore,
the transmission characteristic is linearized internally.
INPUT (factory setting: 4 - 20 mA): Specification of the selected unit signal.
Options:
4 - 20 mA: Use of the 4 ... 20 mA unit signal input
0 - 20 mA: Use of the 0 ... 20 mA unit signal input
Use of the 0 ... 10 V unit signal input
0 - 10 V:
POSITIONER 1067
E-27-