G21 Comfort Anleitung Seite 7

Speed shifts
1. Add ingredients and water or milk to the mixing chamber as required.
2. Touch the „Speed" button to enter speed adjustment function, continuously touch the
button to select the required speed level and touch the „Start/Cancel" button to start the
program.
3. The speed adjustment levels are divided into 1-9 setting, L – lowest RPM, H – highest RPM,
A – auto program – low to high RPM with pulse mode.
Tips for using product features
• The appliance will not add water automatically if you choose the juice or milkshake
programs. Therefore, do not forget to add the required amount of liquids to the mixing
chamber. For other programs, do not add any liquids to the mixing chamber – the appliance
will add it automatically from the water tank. The appliance will not add milk/cream, so add
it to the mixing chamber based on your needs (for soups etc.)
• Use the speed adjustment for recipes with special needs of the blending speed.
• To cancel the mixing process, press and hold the „Start/Cancel" button for two seconds.
• You can use the „Quick soup" program for capacity up to 600 ml with 10 minute working
process.
Reservation
1. Add ingredients and water - Open the lid of the mixing chamber and add ingredients. Open
the water tank lid and add water to the required level above the water level, close the mixing
chamber and the water tank lids and place the milk container and water waste box in place.
Make sure the mixing chamber is dry before adding ingredients if select timer function.
2. Menu selection - Touch „Program" button to select the menu the user wants to reserve.
Timer function is only applicable to heating function. Non-heating functions such as fruit and
vegetable juice and milkshake cannot be reserved.
3. Capacity selection - Touch the „Capacity" to select the desired capacity.
4. Time selection - Touch the „Timer" to select the desired time. Each time users press it, the
time increases by 15 minutes. For example, at 6:15 and 6:30, the timer is the time when the
drink is completed.
5. Start timer - Touch „Start/Cancel" button to start the program, press and hold the button to
cancel the current time function.
Cleaning and maintenance
Maintenance of mixing chamber
• Program selection
• Touch „Program" and select the cleaning function – it will finish after 15 minutes.