1
2
1. LED display - time/capacity
2. Abnormal prompt
3. Program button
4. Capacity selection button
5. Start/Stop button
Note: It is necessary to set the right time during the first startup. Press „Menu" and
„Start/Cancel" buttons at the same time for two seconds – the displays shows „--:--„. Pressing
the „Menu" button once increases the time fro 1 hour. Pressing the „Capacity" button once
decreases it for 1 hour. Pressing the „Timer" button increases the time for 1 minute and pressing
the „Speed" button decreases it for 1 minute. After setting the right time, confirm it by long
pressing the „Start/Cancel" button.
Installation guide
1. Fill the water tank with enough water and
install it in place.
2. Install the waste box in place.
3. Install the glass container in place.
4. After the ingredients are placed in
the mixing jar, place the cover into
corresponding position and rotate
it clockwise.
3
3
4
5
2
6
7
6. Reservation button
7. Speed shifts
8. Menu list
9. Status
4
9
8
1