Adjustments; General; Adjusting The Gripping Depth - probst HVZ-ECO Betriebsanleitung

Adjustments

6.3

General

For all adjustments the device must be completely shut down!
Caution with all adjustments exists danger of injury the hands!
6.3.1

Adjusting the gripping depth

Facing bedding sand (planum)
Adjust the gripping depth (laying side) so, that the steel-
lamellas are gripping in the lower
(see fig. 2).
Swing crank upwards to adjust the gripping depth.
51400034
With extremely large stone layers it recommends to
⅓
adjust the gripping depth a little lower, so that the steel-
of the stone layer
lamellas grip in the lowest range of the stone layer.
Otherwise it exist the danger that the stone layer breaks
out.
Fig. 1
Adjust the gripping depth identical on both sides of the
device ().
Swing crank downwards and secure it in the same
position.
Fig. 3
V3
⅓

¼
⅓
19 / 41
Fig. 2
Fig. 4
GB