Kärcher SGV 6/5 Bedienungsanleitung Seite 22

Replacing the coarse dirt filter
 Open the cover of the wastewater container.
 Push the locking mechanism of the wastewater
container up.
 Remove the wastewater container.
 Unlock the closure of the wastewater container and
remove the lid.
 Turn cover by 180° and set it aside.
 Remove the coarse dirt filter from the filter holder
and replace it.
Maintenance intervals
Yearly
 Have the device decalcified by customer service.
Troubleshooting
DANGER
Switch off the appliance, pull the power plug and allow
the appliance to cool down prior to performing any work
on the appliance.
DANGER
Repair works may only be performed by the authorized
customer service.
Display without indicator lamp
 Refill detergent.
 Insert the detergent container correctly, slide it all
the way in to the stop.
Indicator lamp "Service" is flashing yellow
 Turn off the appliance, wait briefly, turn on the ap-
pliance once again.
 If the indicator lamp does not go out, repeat the
procedure (max. 4 times).
Advance warning descaling (100h more)
 Have the device decalcified by customer service.
Indicator lamp "Service" is yellow
Descaling
 Have the device decalcified by customer service.
Indicator lamp "Fresh water container
empty" is red
 Refill fresh water.
 Insert the fresh water container correctly, slide it all
the way in to the stop.
22
refill
detergent
service
error: E07
service
error: E14
service
error: E15
refill
fresh water
Indicator lamp "Wastewater container full" is
 Empty wastewater.
 Insert the wastewater container properly and lock
it.
Indicator lamp "Disturbance" flashes red
 Turn off the appliance.
 Check fresh water container for proper seating.
 Switch the machine back on again.
 If the indicator lamp does not go out, repeat the
procedure (max. 4 times).
The "Service" indicator lamp is yellow and
the "Disturbance" indicator lamp is red at the
 Inform Customer Service.
 Inform Customer Service.
 Inform Customer Service.
 Inform Customer Service.
Indicator lamp "Disturbance" is red
 Check accessory plug for proper seating.
 Turn off the appliance, wait briefly, turn on the ap-
pliance once again.
 Inform the after sales service if the error reoccurs.
 Check accessory plug for proper seating.
 If water gets into the handle, ensure complete dry-
ing.
 Turn off the appliance, wait briefly, turn on the ap-
pliance once again.
 Inform the after sales service if the error reoccurs.
Insufficient vacuum performance
 Remove clogging from floor nozzle, steam suction
pipe, handle, and steam suction hose.
 Remove clogging from accessories.
Increased temperatures in the handle
 Check the seals (2x O-ring) in the handle and in the
steam suction pipes.
If malfunction can not be fixed, the device must be
checked by customer service.
– 7
EN
red
drain
wastewater
service
error: E01
same time
service
error: E01
service
error: E07
service
error: E09
service
error: E16
service
error: E12
service
error: E13
Customer Service