Automatic Mowing; Mowing Independently Of Active Times; Manual Mowing - Viking MI 632 Gebrauchsanleitung

– There are areas which are not mown
sufficiently, e.g because the mowing
area has lots of corners.
– Intensive grass growth during the
growing period.
– Particularly dense lawn.
Reduction of the mowing duration:
( 10.7)
– Reduced grass growth owing to heat,
cold or dryness.
Creation of a new mowing plan: (
– The size of the mowing area has been
changed.
New installation: ( 10.13)
– New location of the docking station.
– Initial operation on a new mowing area.

14.4 Automatic mowing

● Switch on automatic mowing:
When automatic mowing is
switched on, the Automatic
symbol appears next to the
battery symbol in the display. (
● Starting mowing operation:
The mowing operations are
automatically distributed between the
available active times. (
● Ending mowing operation:
When the battery is discharged, the
robotic mower automatically travels
back to the docking station. (
A running mowing operation can be
ended manually at any time using the
STOP button. ( 5.1)
A running mowing operation can also
be ended immediately using the Home
button on the docking station. (
0478 131 9920 C - EN
All manuals and user guides at all-guides.com
Mowing areas that the robotic
mower reaches via a corridor are
only mown if starting points have
been defined in the relevant area.
14.5 Mowing independently of active
times
Mowing areas with docking station:
● In order to mow a part of the mowing
area that can only be reached via a
corridor, carry or steer the robotic
10.7)
mower there.
● Immediate mowing:
Call up the Start mowing command
( 10.4) or press the Mow button.
The mowing operation starts
immediately and continues until the
selected time.
● Time-delayed mowing:
Call up the Start time-delayed
mowing command. (
The mowing operation starts at the
selected start time and continues until
the selected end time.
● Ending mowing manually:
10.4)
A running mowing operation can be
ended at any time using the STOP
button. (
A running mowing operation can also
13.3)
be ended immediately using the Home
button on the docking station. (
If necessary, the robotic mower
charges the battery in the interim
14.7)
and then continues the mowing
operation until the selected end
time.
Secondary areas:
● Carry or steer the robotic mower to the
12.1)
secondary area.
10.4)
5.1)
12.1)
● Immediate mowing:
Call up the Start mowing command
( 10.4) or press the Mow button.
The mowing operation starts
immediately and continues until the
selected time.
● Time-delayed mowing:
Call up the Start time-delayed
mowing command. ( 10.4)
The mowing operation starts at the
selected start time and continues until
the selected end time.
● Ending mowing:
When the selected end time is reached,
the robotic mower stops in the
secondary area with an appropriate
message. Return the machine to the
docking station to recharge the battery
and confirm the displayed message.
( 23.)
A running mowing operation can be
ended manually at any time using the
STOP button. ( 5.1)
If the battery runs flat before the
selected end time, the mowing
operation is shortened accordingly.

14.6 Manual mowing

The impact sensor and edge
limitation are disabled during
manual mowing.
● Charge the battery if necessary
( 14.8)
● Remove the control panel (
● Activate the Hand control command
( 10.4)
14.2)
117