Viking MI 632 Gebrauchsanleitung Seite 106

10.8 Information
1. Messages:
All active errors, faults and
recommendations are listed
together with the times of occurrence in
the Messages menu. During error-free
operation, the text "No messages"
appears.
The message details are displayed by
pressing the OK button. ( 23.)
2. Events:
The last activities of the robotic
mower are listed in the Events
menu.
Details of the events (additional text, time
and code) can be displayed by pressing
the OK button.
If certain activities occur unusually
frequently, your VIKING specialist
dealer has further details. Errors
during normal operation are
documented in the messages.
3. iMow status:
Details of the robotic mower can
be found in the iMow status
menu.
– Charge state:
Battery charge in percent
104
All manuals and user guides at all-guides.com
– Rem. time:
The remaining mowing duration during
the current week in hours and minutes
– Time and date
– Start time:
Start of the next planned mowing
operation
– Total number of completed mowing
operations
– Mowing hours:
Duration of all completed mowing
operations in hours
– Distance:
Total distance covered in metres
– Ser. No.:
Serial number of the robotic mower.
This is also to be found on the
identification plate in the compartment
beneath the control panel.
– Battery:
Serial number of the battery
– Software:
Installed machine software
4. Lawn status:
Details regarding the lawn are
listed in the Lawn status menu.
– Mowing area in square metres:
This value is entered during initial
installation or new installation (
– Round time:
Duration of one circuit around the
mowing area in minutes and seconds
– Starting points 1 – 4:
Distance of the relevant starting point
from the docking station in metres,
measured in a clockwise direction
( 10.13)
– Circumference:
Circumference of the mowing area in
metres
– Edge mowing:
Frequency of edge mowing per week
( 10.13)
10.9 Settings
1. iMow:
Adapt machine settings
( 10.10)
2. Installation:
Adapt and test the installation
( 10.13)
3. Safety:
Adapt the safety settings (
4. Service:
Maintenance and service (
9.4)
5. Dealer area:
This menu is protected by the
dealer code. Your VIKING
specialist dealer performs a variety of
maintenance and service operations with
the aid of this menu.
10.15)
10.16)
0478 131 9920 C - EN