Operation Of The Appliance; Residual Heat Indicator - Sharp KH-9I39CS00-EU Bedienungsanleitung

OPERATION OF THE
APPLIANCE
Use the induction cooking zones with
suitable cookware.
After the power supply is turned on,
all of displays light up for a moment.
When this time is over, the hob goes
into stand-by mode and is ready for
operation.
The hob is controlled with electronic
sensors which are operated by touching
the related sensors. Each sensor
activation is followed by a sound signal
(buzzer).
Switching the appliance on:
Switch the hob on by pressing the ON/
OFF key All heater displays show
a static "0", mode function and bridge
function indicator will illuminates and the
bottom right dots blink. (If no cooking-
zone is selected within 20 seconds, the
hob will automatically turn off.)
Switching the appliance off:
Switch the hob off at any time by
pressing .
The ON/OFF key
priority in the switch off function.
Mode function and bridge function
indicator will no longer illuminates.
Switching the cooking-zones
on:
Set the heat level by touching
always has
EN
the related heater sliding button
be shown on the selected heater
display and the blinking dots on all
other heater displays will no longer
illuminate.
Now element is ready to use. For fast
boil times, select the desired cooking
level, then press the "P" button to
activate the Boost function
Switching the Cooking Zones
Off
Use the related heater Sliding Button
down to "0". (Pressing the right and left
of the slider button simultaneously also
turns the temperature to "0").
If the cooking zone is hot, "0" will be
displayed instead of "H".
Switching all the cooking-zones
off:
To turn all the cooking zones off at once,
press the key.
In stand-by mode, an "H" appears on all
cooking zones which are hot.
Residual heat indicator:
Residual heat indicator indicates that
the ceramic glass
touch temperature in the circumference
of the cooking zone.
After switching off the cooking zone, the
respective display displays an "H" until
the assigned cooking zone temperature
is in an uncritical level.
. A static dot will
, turn the temperature
has a dangerous