Milling Zirconium Oxide - Amann Girrbach ceramill motion DRS Betriebsanleitung

▷ To verify the block: Scan the material code from
the block or the packaging.
▷ After the job is set up: Press the
▷ To interrupt or stop the program: Press
button.
At the end of the milling/grinding pro-
gram, the door opens automatically.
O P E R A T I O N D U R I N G P R O D U C T I O N
7.5
When milling zirconium oxide, an additional query
is made as to whether the necessary water tank
with special 5 μm filter is inserted.
Possible damage to the machine and insufficient
milling results! The included water tank for
processing glass ceramics and plastics uses fil-
ters with 10 μm mesh.
▷ In the zirconium water tank 181410, use only
the filters with 5 μm mesh size provided for
START button.
STOP
this purpose (observe imprint on foil).

Milling zirconium oxide

NOTE:
E N
39